Surface Modification of Aluminum Alloys Using Sol–Gel Coatings for Enhanced Corrosion Resistance

Authors

  • Oviya Issac Department of Computer Science, George Mason University, Fairfax, VA, USA. Author
  • Rowan Clerkin Department of Computer Science, University of North Texas, Denton, TX, USA. Author

Keywords:

aluminum alloys; sol–gel coatings; corrosion resistance; barrier transport; hybrid organic–inorganic networks; interfacial adhesion

Abstract

Aluminum alloys depend on a thin passive oxide for corrosion resistance, but chloride exposure, intermetallic galvanic coupling, and mechanical damage can initiate pitting and undermine long-term service. Chromate conversion coatings have provided effective inhibition, yet their toxicity has driven interest in sol–gel-derived surface modification. Sol–gel coatings are attractive because they can be applied as thin, covalently bonded hybrid organic–inorganic films that combine barrier action, interfacial passivation, and reservoir-based inhibitor delivery. Their rational design remains difficult because hydrolysis–condensation chemistry, pore transport, defect formation, adhesion, and electrochemical inhibition are usually optimized separately. This manuscript develops an analytical design framework for sol–gel coatings on aluminum alloys that links network formation, effective water transport, coating capacitance, inhibitor release, inhibition efficiency, adhesion work, and a dimensionless barrier index. The framework treats the coating as a defective transport medium coupled to an electrochemical interface and identifies conditions under which densification improves protection and conditions under which it promotes cracking or poor stress accommodation. It also explains why inhibitor release must be matched to defect evolution rather than maximized independently, and why adhesion and barrier transport must be evaluated together. The resulting design logic supports formulation selection, pretreatment decisions, curing control, and electrochemical interpretation without relying on new experimental measurements. The analysis provides a technically coherent basis for comparing sol–gel systems and for directing future experimental validation toward the most sensitive material and processing variables.

References

1. Twite, R. L., & Bierwagen, G. P. (1998). Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys. Progress in Organic Coatings, 33(2), 91–100.

2. Frankel, G. S. (1998). Pitting corrosion of metals: A review of the critical factors. Journal of the Electrochemical Society, 145(6), 2186–2198.

3. Metroke, T. L., Parkhill, R. L., & Knobbe, E. T. (2001). Passivation of metal alloys using sol–gel-derived materials—A review. Progress in Organic Coatings, 41(4), 233–238.

4. Brinker, C. J., & Scherer, G. W. (1990). Sol–gel science: The physics and chemistry of sol–gel processing. Academic Press.

5. Wang, D., & Bierwagen, G. P. (2009). Sol–gel coatings on metals for corrosion protection. Progress in Organic Coatings, 64(4), 327–338.

6. Zheludkevich, M. L., Salvado, I. M., & Ferreira, M. G. S. (2005). Sol–gel coatings for corrosion protection of metals. Journal of Materials Chemistry, 15(48), 5099–5111.

7. Figueira, R. B., Silva, C. J. R., & Pereira, E. V. (2015). Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: A review of recent progress. Journal of Coatings Technology and Research, 12(1), 1–35.

8. Du, Y. J., Damron, M., Tang, G., Zheng, H., Chu, C.-J., & Osborne, J. H. (2001). Inorganic/organic hybrid coatings for aircraft aluminum alloy substrates. Progress in Organic Coatings, 41(4), 226–232.

9. Khramov, A. N., Voevodin, N. N., Balbyshev, V. N., & Mantz, R. A. (2005). Sol–gel-derived corrosion-protective coatings with controllable release of incorporated organic inhibitors. Thin Solid Films, 483(1–2), 191–196.

10. Shchukin, D. G., & Möhwald, H. (2007). Self-repairing coatings containing active nanoreservoirs. Small, 3(6), 926–943.

11. Zheludkevich, M. L., Shchukin, D. G., Yasakau, K. A., Möhwald, H., & Ferreira, M. G. S. (2007). Anticorrosion coatings with self-healing effect based on nanocontainers impregnated with corrosion inhibitor. Chemistry of Materials, 19(3), 402–411.

12. Grundmeier, G., Schmidt, W., & Stratmann, M. (2000). Corrosion protection by organic coatings: Electrochemical mechanism and novel methods of investigation. Electrochimica Acta, 45(15–16), 2515–2533.

13. Sanchez, C., Soler-Illia, G. J. de A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001). Designed hybrid organic–inorganic nanocomposites from functional nanobuilding blocks. Chemistry of Materials, 13(10), 3061–3083.

14. Sanchez, C., Julián, B., Belleville, P., & Popall, M. (2005). Applications of hybrid organic–inorganic nanocomposites. Journal of Materials Chemistry, 15(35–36), 3559–3592.

15. Mekeridis, E. D., Kartsonakis, I. A., & Kordas, G. (2012). Multilayer organic–inorganic coating incorporating TiO2 nanocontainers loaded with inhibitors for corrosion protection of AA2024-T3. Progress in Organic Coatings, 73(2–3), 142–148.

16. Voevodin, N. N., Grebasch, N. T., Soto, W. S., Arnold, F. E., & Donley, M. S. (2001). Potentiodynamic evaluation of sol–gel coatings with inorganic inhibitors. Surface and Coatings Technology, 140(1), 24–28.

Downloads

Published

2026-07-18