Sulfur Vacancy Engineering in Molybdenum Disulfide for Electrochemical Hydrogen Evolution

Authors

  • Xalak Kurian Department of Computer Science, University of New Hampshire, Durham, NH, USA. Author
  • Ibrahim Jacobi Jackel Department of Computer Science, University of Alabama at Birmingham, Birmingham, AL, USA. Author
  • Riya Yogi Department of Computer Science, Binghamton University, Binghamton, NY, USA. Author
  • Laoise M. O'Kelly Department of Computer Science, University of North Texas, Denton, TX, USA. Author

Keywords:

sulfur vacancy; molybdenum disulfide; hydrogen evolution reaction; defect engineering; electrocatalysis; active site utilization

Abstract

Molybdenum disulfide is a compelling non-precious electrocatalyst for the hydrogen evolution reaction, yet its catalytic activity is constrained by the relative inertness of the basal plane and the limited accessibility of edge sites. Sulfur vacancies offer a direct route to activate otherwise unreactive regions, but the literature often treats vacancy engineering as a monotonic increase in defect density. This manuscript develops a mechanistic and analytical framework that treats sulfur vacancy engineering as a coupled problem of formation thermodynamics, spatial distribution, electronic transport, hydrogen adsorption energetics, and operational stability. The framework distinguishes bulk vacancy concentration from catalytically accessible vacancy density and relates both to hydrogen adsorption free energy, exchange current density, sheet conductance, and overpotential requirements. A central argument is that an optimum vacancy regime exists between underactivation and defect-induced degradation, and that the optimum depends on phase, strain, electrode thickness, and local sulfur chemical potential. The analysis also identifies electrically or ionically buried vacancies, vacancy clustering, sulfur healing, and phase reconstruction as principal failure modes that can decouple nominal defect density from catalytic performance. By deriving design expressions for vacancy formation energy, stoichiometric vacancy density, effective active-site utilization, exchange current scaling, and Tafel behavior, the manuscript provides a technically grounded basis for interpreting defect-engineered molybdenum disulfide electrodes and for planning characterization protocols that resolve distribution and stability rather than concentration alone.

References

1. Hinnemann, B., Moses, P. G., Bonde, J., Jaramillo, T. F., Nielsen, J. H., Horch, S., Chorkendorff, I., & Nørskov, J. K. (2005). Biomimetic hydrogen evolution: MoS2 nanoparticles as catalyst for hydrogen evolution. Journal of the American Chemical Society, 127(15), 5308–5309.

2. Jaramillo, T. F., Jørgensen, K. P., Bonde, J., Nielsen, J. H., Horch, S., & Chorkendorff, I. (2007). Identification of active edge sites for electrochemical H2 evolution from MoS2 nanocatalysts. Science, 317(5834), 100–102.

3. Nørskov, J. K., Bligaard, T., Logadottir, A., Kitchin, J. R., Chen, J. G., Pandelov, S., & Stimming, U. (2005). Trends in the exchange current for hydrogen evolution. Journal of The Electrochemical Society, 152(3), J23–J26.

4. Greeley, J., Jaramillo, T. F., Bonde, J., Chorkendorff, I., & Nørskov, J. K. (2006). Computational high-throughput screening of electrocatalytic materials for hydrogen evolution. Nature Materials, 5(11), 909–913.

5. Conway, B. E., & Tilak, B. V. (2002). Interfacial processes involving electrocatalytic evolution and oxidation of H2, and the role of chemisorbed H. Electrochimica Acta, 47(22–23), 3571–3594.

6. Voiry, D., Salehi, M., Silva, R., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., & Chhowalla, M. (2013). Conducting MoS2 nanosheets as catalysts for hydrogen evolution reaction. Nano Letters, 13(12), 6222–6227.

7. Lukowski, M. A., Daniel, A. S., Meng, F., Forticaux, A., Li, L., & Jin, S. (2013). Enhanced hydrogen evolution catalysis from chemically exfoliated metallic MoS2 nanosheets. Journal of the American Chemical Society, 135(28), 10274–10277.

8. Chhowalla, M., Shin, H. S., Eda, G., Li, L. J., Loh, K. P., & Zhang, H. (2013). The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets. Nature Chemistry, 5(4), 263–275.

9. Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012). Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. Nature Nanotechnology, 7(11), 699–712.

10. Mak, K. F., Lee, C., Hone, J., Shan, J., & Heinz, T. F. (2010). Atomically thin MoS2: A new direct-gap semiconductor. Physical Review Letters, 105(13), 136805.

11. Bollinger, M. V., Lauritsen, J. V., Jacobsen, K. W., Nørskov, J. K., Helveg, S., & Besenbacher, F. (2001). One-dimensional metallic edge states in MoS2. Physical Review Letters, 87(19), 196803.

12. Zhou, W., Zou, X., Najmaei, S., Liu, Z., Shi, Y., Kong, J., Lou, J., Ajayan, P. M., Yakobson, B. I., & Idrobo, J. C. (2013). Intrinsic structural defects in monolayer molybdenum disulfide. Nano Letters, 13(6), 2615–2622.

13. Li, H., Tsai, C., Koh, A. L., Cai, L., Contryman, A. W., Fragapane, A. H., Zhao, J., Han, H. S., Manoharan, H. C., Abild-Pedersen, F., Nørskov, J. K., & Zheng, X. (2016). Activating and optimizing MoS2 basal planes for hydrogen evolution through the formation of strained sulphur vacancies. Nature Materials, 15(1), 48–53.

14. Hong, J., Hu, Z., Probert, M., Li, K., Lv, D., Yang, X., Gu, L., Mao, N., Feng, Q., Xie, L., Zhang, J., Wu, D., Zhang, Z., Jin, C., Ji, W., Zhang, X., Yuan, J., & Zhang, Z. (2015). Exploring atomic defects in molybdenum disulphide monolayers. Nature Communications, 6, 6293.

15. Ye, G., Gong, Y., Lin, J., Li, B., He, Y., Pantelides, S. T., Zhou, W., Vajtai, R., & Ajayan, P. M. (2016). Defects engineered monolayer MoS2 for improved hydrogen evolution reaction. Nano Letters, 16(2), 1097–1103.

16. Tsai, C., Chan, K., Abild-Pedersen, F., & Nørskov, J. K. (2014). Active edge sites in MoS2 and WS2 catalysts for the hydrogen evolution reaction: A density functional study. Physical Chemistry Chemical Physics, 16(26), 13156–13164.

17. Skúlason, E., Tripkovic, V., Björketun, M. E., Gudmundsdóttir, S., Karlberg, G., Rossmeisl, J., Bligaard, T., Jónsson, H., & Nørskov, J. K. (2010). Modeling the electrochemical hydrogen oxidation and evolution reactions on the basis of density functional theory calculations. Journal of Physical Chemistry C, 114(42), 18182–18197.

18. Eda, G., Yamaguchi, H., Voiry, D., Fujita, T., Chen, M., & Chhowalla, M. (2011). Photoluminescence from chemically exfoliated MoS2. Nano Letters, 11(12), 5111–5116.

19. Xie, J., Zhang, J., Li, S., Grote, F., Zhang, X., Zhang, H., Wang, R., Lei, Y., Pan, B., & Xie, Y. (2013). Controllable disorder engineering in oxygen-incorporated MoS2 ultrathin nanosheets for efficient hydrogen evolution. Journal of the American Chemical Society, 135(47), 17881–17888.

20. Lauritsen, J. V., Kibsgaard, J., Helveg, S., Topsøe, H., Clausen, B. S., Lægsgaard, E., & Besenbacher, F. (2007). Size-dependent structure of MoS2 nanocrystals. Nature Nanotechnology, 2(1), 53–58.

Downloads

Published

2026-09-04