Thermal Stability and Phase Transition Behavior of Bio-Based Phase Change Materials for Energy Storage
Keywords:
bio-based phase change materials; thermal stability; phase transition; latent heat; supercooling; thermal cyclingAbstract
Bio-based phase change materials offer a renewable route to latent heat storage, but their practical reliability depends on two coupled properties that are often reported separately: thermal stability and phase transition behavior. Chemical degradation, oxidation, hydrolysis, polymorphic transformation, eutectic fractionation, supercooling, and cycling-induced drift can each change transition temperature, latent heat, and heat-transfer response. This manuscript develops an analytical framework for interpreting and comparing these effects without treating a single differential scanning calorimetry thermogram or a single thermal cycling test as sufficient evidence of stability. The framework separates chemical stability from phase stability, defines apparent enthalpy over an operating temperature window, bounds eutectic composition sensitivity through ideal solid-liquid equilibrium, expresses degradation through Arrhenius kinetics and acceleration factors, represents nucleation-limited supercooling through classical nucleation theory, and introduces a cycling stability index that combines enthalpy retention with transition-temperature drift. The analysis clarifies why decomposition onset, phase-change enthalpy, supercooling degree, and cycle-dependent transition temperature should be reported jointly, and why accelerated aging cannot be mapped directly to service life when the dominant degradation pathway changes with temperature. Design implications include controlling oxygen and moisture exposure, selecting compositions away from eutectic sensitivity, using nucleating agents or encapsulation where justified, and validating materials within application-specific temperature windows. The resulting framework supports defensible material screening, reporting standardization, and reliability assessment for bio-based latent heat storage.
References
1. Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009). Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews, 13(2), 318–345. https://doi.org/10.1016/j.rser.2007.10.005
2. Pielichowska, K., & Pielichowski, K. (2014). Phase change materials for thermal energy storage. Progress in Materials Science, 65, 67–123. https://doi.org/10.1016/j.pmatsci.2014.03.005
3. Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004). A review on phase change energy storage: Materials and applications. Energy Conversion and Management, 45(9–10), 1597–1615. https://doi.org/10.1016/j.enconman.2003.09.015
4. Zalba, B., Marín, J. M., Cabeza, L. F., & Mehling, H. (2003). Review on thermal energy storage with phase change: Materials, heat transfer analysis and applications. Applied Thermal Engineering, 23(3), 251–283. https://doi.org/10.1016/S1359-4311(02)00192-8
5. Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010). A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy Reviews, 14(2), 615–628. https://doi.org/10.1016/j.rser.2009.10.015
6. Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011). Materials used as PCM in thermal energy storage in buildings: A review. Renewable and Sustainable Energy Reviews, 15(3), 1675–1695. https://doi.org/10.1016/j.rser.2010.11.018
7. Feldman, D., Shapiro, M. M., Banu, D., & Fuks, C. J. (1989). Fatty acids and their mixtures as phase-change materials for thermal energy storage. Solar Energy Materials, 18(3–4), 201–216. https://doi.org/10.1016/0165-1633(89)90003-8
8. Sari, A., & Kaygusuz, K. (2002). Thermal performance of a eutectic mixture of lauric and stearic acids as PCM encapsulated in the annulus of two concentric pipes. Solar Energy, 72(6), 493–504. https://doi.org/10.1016/S0038-092X(02)00026-9
9. Sari, A. (2006). Eutectic mixtures of some fatty acids for latent heat storage: Thermal properties and thermal reliability with respect to thermal cycling. Energy Conversion and Management, 47(9), 1207–1218. https://doi.org/10.1016/j.enconman.2005.07.008
10. Shukla, A., Buddhi, D., & Sawhney, R. L. (2008). Thermal cycling test of few selected inorganic and organic phase change materials. Renewable Energy, 33(12), 2606–2614. https://doi.org/10.1016/j.renene.2008.02.026
11. Khudhair, A. M., & Farid, M. M. (2004). A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Energy Conversion and Management, 45(2), 263–275. https://doi.org/10.1016/S0196-8904(03)00131-6
12. Baetens, R., Jelle, B. P., & Gustavsen, A. (2010). Phase change materials for building applications: A state-of-the-art review. Energy and Buildings, 42(9), 1361–1368. https://doi.org/10.1016/j.enbuild.2010.03.026
13. Gunasekara, S. N., Martin, V., & Chiu, J. N. (2017). Phase equilibrium in the design of phase change materials for thermal energy storage: A review. Renewable and Sustainable Energy Reviews, 73, 558–581. https://doi.org/10.1016/j.rser.2017.01.101
14. Mehling, H., & Cabeza, L. F. (2008). Heat and cold storage with PCM: An up to date introduction into basics and applications. Springer.
15. Palomo del Barrio, E., Godin, A., Duquesne, M., Daranlot, J., Jolly, J., Alshaer, W., Kouadio, T., & Acem, Z. (2017). Characterization of different sugar alcohols as phase change materials for thermal energy storage applications. Solar Energy Materials and Solar Cells, 159, 560–569. https://doi.org/10.1016/j.solmat.2016.10.009
16. Sharma, R. K., Ganesan, P., Tyagi, V. V., Mahlia, T. M. I., & Sandaran, S. C. (2015). Developments in organic solid–liquid phase change materials and their applications in thermal energy storage. Energy Conversion and Management, 95, 193–228. https://doi.org/10.1016/j.enconman.2015.01.084
17. Tatsidjodoung, P., Le Pierrès, N., & Luo, L. (2013). A review of potential materials for thermal energy storage in building applications. Renewable and Sustainable Energy Reviews, 18, 327–349. https://doi.org/10.1016/j.rser.2012.10.025
18. Kousksou, T., Bruel, P., Jamil, A., El Rhafiki, T., & Zeraouli, Y. (2014). Energy storage: Applications and challenges. Solar Energy Materials and Solar Cells, 120, 59–80. https://doi.org/10.1016/j.solmat.2013.08.015
19. Abhat, A. (1983). Low temperature latent heat thermal energy storage: Heat storage materials. Solar Energy, 30(4), 313–332. https://doi.org/10.1016/0038-092X(83)90186-X
20. Safari, A., Saidur, R., Sulaiman, F. A., Xu, Y., & Dong, J. (2017). A review on supercooling of phase change materials in thermal energy storage systems. Renewable and Sustainable Energy Reviews, 70, 905–919. https://doi.org/10.1016/j.rser.2016.11.272
Downloads
Published
Issue
Section
License
Copyright (c) 2026 International Journal of Materials and Chemical Sciences

This work is licensed under a Creative Commons Attribution 4.0 International License.