Fabrication and Performance Evaluation of Functionalized Membranes for Heavy Metal Ion Removal from Wastewater

Authors

  • Marisela Escribano School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR, USA. Author

Keywords:

functionalized membranes; heavy metal ions; adsorptive ultrafiltration; ligand density; Donnan exclusion; regeneration

Abstract

Heavy metal ions such as Pb(II), Cd(II), Hg(II), Cu(II), and Cr(III) remain difficult to remove from complex wastewaters because precipitation and conventional adsorption are sensitive to pH, ionic strength, and competing solutes. Pressure-driven membranes can provide compact, continuous separation, but tight nanofiltration and reverse osmosis require high hydraulic pressure, whereas loose ultrafiltration membranes generally reject hydrated metal ions poorly. Functionalized membranes address this limitation by combining size exclusion with chemical affinity, yet their fabrication and evaluation are often reported through isolated capacity or flux values that do not reveal the coupled effects of ligand density, pore narrowing, binding equilibrium, and regeneration. This article develops a mechanism-informed fabrication and performance-evaluation framework for thiol- and carboxyl-functionalized polyethersulfone ultrafiltration membranes containing hydrophilic inorganic or carbonaceous nanofillers. The central contribution is a connected analytical model that links ligand grafting to effective pore radius, hydraulic resistance, Langmuir-type binding, Donnan partitioning, multicomponent selectivity, breakthrough behavior, and regeneration efficiency. The framework distinguishes thermodynamic affinity from kinetic uptake and from irreversible fouling, and it specifies measurable quantities, boundary conditions, and failure modes that must be reported for defensible comparison across membranes. Analytical assessment indicates that optimal performance is not obtained at maximum ligand density: excessive grafting narrows pores, increases resistance, and can reduce accessible binding sites. Instead, performance depends on a narrow window in which ligand accessibility, Donnan charge, and hydraulic permeability are balanced. The proposed framework supports reproducible membrane development and more informative comparisons between adsorptive ultrafiltration, nanofiltration, and hybrid adsorption processes.

References

1. Fu, F., & Wang, Q. (2011). Removal of heavy metal ions from wastewaters: A review. Journal of Environmental Management, 92(3), 407–418. https://doi.org/10.1016/j.jenvman.2010.11.011

2. Carolin, C. F., Kumar, P. S., Saravanan, A., Joshiba, G. J., & Naushad, M. (2017). Efficient techniques for the removal of toxic heavy metals from aquatic environment: A review. Journal of Environmental Chemical Engineering, 5(3), 2782–2799. https://doi.org/10.1016/j.jece.2017.05.029

3. Bolisetty, S., Peydayesh, M., & Mezzenga, R. (2019). Sustainable technologies for water purification from heavy metals: Review and analysis. Chemical Society Reviews, 48(2), 463–487. https://doi.org/10.1039/C8CS00493E

4. Ulbricht, M. (2006). Advanced functional polymer membranes. Polymer, 47(7), 2217–2262. https://doi.org/10.1016/j.polymer.2006.01.084

5. Pendergast, M. M., & Hoek, E. M. V. (2011). A review of water treatment membrane nanotechnologies. Energy & Environmental Science, 4(6), 1946–1971. https://doi.org/10.1039/C0EE00541J

6. Shannon, M. A., Bohn, P. W., Elimelech, M., Georgiadis, J. G., Mariñas, B. J., & Mayes, A. M. (2008). Science and technology for water purification in the coming decades. Nature, 452(7185), 301–310. https://doi.org/10.1038/nature06599

7. Werber, J. R., Osuji, C. O., & Elimelech, M. (2016). Materials for next-generation desalination and water purification membranes. Nature Reviews Materials, 1(5), 16018. https://doi.org/10.1038/natrevmaterials.2016.18

8. Kim, J., & Van der Bruggen, B. (2010). The use of nanoparticles in polymeric and ceramic membrane structures: Review of manufacturing procedures and performance improvement for water treatment. Environmental Pollution, 158(7), 2335–2349. https://doi.org/10.1016/j.envpol.2010.03.024

9. Ali, I., & Gupta, V. K. (2007). Advances in water treatment by adsorption technology. Nature Protocols, 1(6), 2661–2667. https://doi.org/10.1038/nprot.2006.370

10. Wan Ngah, W. S., Teong, L. C., & Hanafiah, M. A. K. M. (2011). Adsorption of dyes and heavy metal ions by chitosan composites: A review. Carbohydrate Polymers, 83(4), 1446–1456. https://doi.org/10.1016/j.carbpol.2010.11.004

11. Zhao, G., Li, J., Ren, X., Chen, C., & Wang, X. (2011). Few-layered graphene oxide nanosheets as superior sorbents for heavy metal ion pollution management. Environmental Science & Technology, 45(24), 10454–10462. https://doi.org/10.1021/es203439v

12. Vunain, E., Mishra, A. K., & Mamba, B. B. (2017). Dendrimers, mesoporous silicas and chitosan-based nanosorbents for the removal of heavy-metal ions: A review. International Journal of Biological Macromolecules, 94, 399–410. https://doi.org/10.1016/j.ijbiomac.2016.10.037

13. Mbareck, C., Nguyen, Q. T., Alaoui, O. T., & Barillier, D. (2009). Elaboration, characterization and application of polysulfone and polyacrylic acid blend ultrafiltration membranes for the removal of heavy metals. Journal of Hazardous Materials, 171(1–3), 93–101.

14. Juang, R.-S., & Shiau, R.-C. (2000). Metal removal from aqueous solutions using chitosan-enhanced membrane filtration. Journal of Membrane Science, 165(2), 159–167. https://doi.org/10.1016/S0376-7388(99)00232-1

15. Mulder, M. (1996). Basic principles of membrane technology (2nd ed.). Kluwer Academic Publishers.

16. Van der Bruggen, B., Vandecasteele, C., Van Gestel, T., Doyen, W., & Leysen, R. (2003). A review of pressure-driven membrane processes in wastewater treatment and drinking water production. Environmental Progress, 22(1), 46–56. https://doi.org/10.1002/ep.670220116

17. Rana, D., & Matsuura, T. (2010). Surface modifications for antifouling membranes. Chemical Reviews, 110(4), 2448–2471. https://doi.org/10.1021/cr800208y

18. Bessbousse, H., Rhlalou, T., Verchère, J.-F., & Lebrun, L. (2008). Removal of heavy metal ions from aqueous solutions by filtration with a novel complexing membrane containing poly(ethyleneimine) in a poly(vinyl alcohol) matrix. Journal of Membrane Science, 307(2), 249–259. https://doi.org/10.1016/j.memsci.2007.09.043

19. Zhao, C., Xue, J., Ran, F., & Sun, S. (2013). Modification of polyethersulfone membranes – A review of methods. Progress in Materials Science, 58(1), 76–150. https://doi.org/10.1016/j.pmatsci.2012.07.002

20. Kang, G.-D., & Cao, Y.-M. (2014). Application and modification of poly(vinylidene fluoride) (PVDF) membranes – A review. Journal of Membrane Science, 463, 145–165. https://doi.org/10.1016/j.memsci.2014.03.055

Downloads

Published

2026-08-01