Interfacial Engineering of Nickel–Iron Layered Double Hydroxides for Electrocatalytic Oxygen Evolution

Authors

  • Antonios Drewes Department of Electrical Engineering and Computer Science, University of Missouri, Columbia, MO, USA. Author

Keywords:

NiFe layered double hydroxides; oxygen evolution reaction; interfacial engineering; Fe–Ni electronic coupling; electrocatalyst stability; microkinetic modeling

Abstract

The oxygen evolution reaction in alkaline media remains a principal kinetic bottleneck for water electrolysis, and nickel–iron layered double hydroxides are among the most active earth-abundant electrocatalysts for this reaction. Their performance is not determined by bulk composition alone. It emerges from coupled interfacial processes involving Fe-induced electronic reorganization, Ni redox transitions, adsorbate turnover, surface reconstruction, and potential-dependent dissolution. This manuscript develops a mechanistic interfacial-engineering framework that treats the NiFe layered double hydroxide–electrolyte interface as a coupled electrochemical, electronic, and structural system. The framework combines a site-balanced microkinetic description of the oxygen evolution reaction with an interfacial-field treatment of surface charging and a thermodynamic criterion for metal dissolution. It then derives a design objective that makes the activity–stability trade-off explicit rather than incidental. The analysis identifies three principal levers: the spatial distribution and coordination environment of Fe, the density and character of surface and near-surface defects, and the electronic transport path between the catalytic layer and the conductive support. It explains why reported activity maxima at intermediate Fe content are consistent with competition between enhanced intrinsic turnover and the blocking or dissolution of accessible active sites. The resulting design rules clarify when exfoliation, pulsed electrodeposition, defect creation, and single-atom modification can improve performance and when they merely redistribute inactive material. The framework provides a technically grounded basis for selecting composition, interfacial architecture, and operating boundaries, and it supports more informative interpretation of apparent activity than composition-only descriptors.

References

1. Trotochaud, L., Young, S. L., Ranney, J. K., & Boettcher, S. W. (2014). Nickel–iron oxyhydroxide oxygen-evolution electrocatalysts: The role of intentional and incidental iron incorporation. Journal of the American Chemical Society, 136(18), 6744–6753. https://doi.org/10.1021/ja502379c

2. Gong, M., & Dai, H. (2015). A mini review of NiFe-based materials as highly active oxygen evolution reaction electrocatalysts. Nano Research, 8(1), 23–39. https://doi.org/10.1007/s12274-014-0591-z

3. Burke, M. S., Enman, L. J., Batchellor, A. S., Zou, S., & Boettcher, S. W. (2015). Oxygen evolution reaction electrocatalysis on transition metal oxides and (oxy)hydroxides: Activity trends and design principles. Chemistry of Materials, 27(22), 7549–7558. https://doi.org/10.1021/acs.chemmater.5b03148

4. Suen, N.-T., Hung, S.-F., Quan, Q., Zhang, N., Xu, Y.-J., & Chen, H. M. (2017). Electrocatalysis for the oxygen evolution reaction: Recent development and future perspectives. Chemical Society Reviews, 46(2), 337–365. https://doi.org/10.1039/C6CS00328A

5. Wang, Q., & O'Hare, D. (2012). Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets. Chemical Reviews, 112(7), 4124–4155. https://doi.org/10.1021/cr200434v

6. Song, F., & Hu, X. (2014). Exfoliation of layered double hydroxides for enhanced oxygen evolution catalysis. Nature Communications, 5, 4477. https://doi.org/10.1038/ncomms5477

7. Friebel, D., Louie, M. W., Bajdich, M., Sanwald, K. E., Cai, Y., Wise, A. M., Cheng, M.-J., Sokaras, D., Weng, T.-C., Alonso-Mori, R., Davis, R. C., Bargar, J. R., Nørskov, J. K., Nilsson, A., & Bell, A. T. (2015). Identification of highly active Fe sites in (Ni,Fe)OOH for electrocatalytic water splitting. Journal of the American Chemical Society, 137(3), 1305–1313. https://doi.org/10.1021/ja511559d

8. Louie, M. W., & Bell, A. T. (2013). An investigation of thin-film Ni–Fe oxide catalysts for the electrochemical evolution of oxygen. Journal of the American Chemical Society, 135(33), 12392–12397. https://doi.org/10.1021/ja405351s

9. Klaus, S., Cai, Y., Louie, M. W., Trotochaud, L., & Bell, A. T. (2015). Effects of Fe electrolyte impurities on Ni(OH)2/NiOOH structure and oxygen evolution activity. Journal of Physical Chemistry C, 119(13), 7243–7254. https://doi.org/10.1021/acs.jpcc.5b00105

10. Görlin, M., Chernev, P., Ferreira de Araújo, J., Reier, T., Dresp, S., Paul, B., Krähnert, R., Dau, H., & Strasser, P. (2016). Oxygen evolution reaction dynamics, faradaic charge efficiency, and the active metal redox states of Ni–Fe oxide water splitting electrocatalysts. Journal of the American Chemical Society, 138(17), 5603–5614. https://doi.org/10.1021/jacs.6b00332

11. Dionigi, F., Zeng, Z., Sinev, I., Merzdorf, T., Deshpande, S., Lopez, M. F., Kunze, S., Zegkinoglou, I., Sarodnik, H., Fan, D., Bergmann, A., Drnec, J., Araujo, J. F. d., Gliech, M., Teschner, D., Zhu, J., Li, W.-X., Greeley, J., Cuenya, B. R., & Strasser, P. (2020). In-situ structure and catalytic mechanism of NiFe and CoFe layered double hydroxides during oxygen evolution. Nature Communications, 11, 2522. https://doi.org/10.1038/s41467-020-16237-1

12. Stevens, M. B., Trang, C. D. M., Enman, L. J., Deng, J., & Boettcher, S. W. (2017). Reactive Fe-sites in Ni/Fe (oxy)hydroxide are responsible for exceptional oxygen electrocatalysis activity. Journal of the American Chemical Society, 139(33), 11361–11364. https://doi.org/10.1021/jacs.7b07117

13. Hunter, B. M., Gray, H. B., & Müller, A. M. (2016). Earth-abundant heterogeneous water oxidation catalysts. Chemical Reviews, 116(22), 14120–14136. https://doi.org/10.1021/acs.chemrev.6b00398

14. Man, I. C., Su, H.-Y., Calle-Vallejo, F., Hansen, H. A., Martínez, J. I., Inoglu, N. G., Kitchin, J., Jaramillo, T. F., Nørskov, J. K., & Rossmeisl, J. (2011). Universality in oxygen evolution electrocatalysis on oxide surfaces. ChemCatChem, 3(7), 1159–1165. https://doi.org/10.1002/cctc.201000397

15. Li, Y.-F., & Selloni, A. (2014). Mechanism and activity of water oxidation on the NiOOH surface. ACS Catalysis, 4(4), 1148–1157. https://doi.org/10.1021/cs4011698

16. Long, X., Wang, Z., Xiao, S., An, Y., & Yang, S. (2016). Transition metal based layered double hydroxides tailored for energy conversion and storage. Materials Today, 19(4), 213–226. https://doi.org/10.1016/j.mattod.2015.10.006

17. Batchellor, A. S., & Boettcher, S. W. (2015). Pulse-electrodeposited Ni–Fe (oxy)hydroxide oxygen evolution electrocatalysts with high geometric and intrinsic activities at large mass loadings. ACS Catalysis, 5(11), 6680–6689. https://doi.org/10.1021/acscatal.5b01551

18. Yin, H., & Tang, Z. (2016). Ultrathin two-dimensional layered metal hydroxides: An emerging platform for advanced catalysis, energy conversion and storage. Chemical Society Reviews, 45(18), 4873–4891. https://doi.org/10.1039/C6CS00377C

19. Zhang, J., Liu, J., Xi, L., Yu, Y., Chen, N., Sun, S., Wang, W., Lange, K. M., & Zhang, B. (2018). Single-atom Au/NiFe layered double hydroxide electrocatalyst: Probing the origin of activity for oxygen evolution reaction. Journal of the American Chemical Society, 140(11), 3876–3879. https://doi.org/10.1021/jacs.8b00177

20. Koper, M. T. M. (2011). Thermodynamic theory of electrocatalytic water splitting. Journal of Electroanalytical Chemistry, 660(2), 254–260. https://doi.org/10.1016/j.jelechem.2011.01.012

Downloads

Published

2026-07-22